TOUR WORLDTW717VIRON

TOUR WORLD TW717V
TW717特設サイト

MOVIE

ie_01.jpg" alt="">
3D

  • See head features in film

    • Page Top

    TECHNOLOGY

    Outstanding distance and stable direction.

    • Thanks to a soft-iron forged integrated cavity design, the sweet spot is enlarged and stabilized flight distance performance and exceptional directional performance are achieved.
    • Balls can be launched on a powerful trajectory by thickening the cavity interior and the part that comes into contact with the ball at impact while the impact feel is mild in the way that only a club head featuring a soft-iron forged design can offer.
    TW717V

    Even a sharp form can yield a high trajectory

    • Despite a sharp form normally associated with an integrated cavity, balls can easily be launched on a high trajectory with a low and deep center-of-gravity design.
    TW717V
    Comparing head sizes by model

    Soft-iron forging for a naturally mild impact feel

    • Thanks to a soft-iron forged integrated cavity design, the sweet spot is enlarged.
    • Distance and stable
      Outstanding performance and direction.
    • A powerful trajectory is made possible by having thickened the part that comes into contact with the ball at impact
    • Unique sense of mild stroke forged soft-iron forged integrated.
    TW717V

    Page Top

    SPEC

    Head material / Manufacturing process Forged
    Head plating Half miroor + Mirror Finish / Double-layer Painting
    Shaft MODUS3
    # (No.) 3 4 5 6 7 8 9 10
    Loft (deg.) 20.0 22.0 25.0 28.0 32.0 36.0 41.0 46.0
    Lie angle (deg.) 59.5 60.0 60.5 61.0 61.5 62.0 62.5 63.0
    Face progression（mm） 4.25 4.75
    Distance to center of gravity (mm) 34.0 34.0 34.0 34.0 34.0 34.0 33.5 33.5
    Height to Center of Gravity (mm) 18.0 18.0 18.5 18.5 19.0 19.5 20.0 20.0
    Depth to center of gravity (mm) 3.6 3.6 3.3 3.3 3.0 2.6 2.2 2.0
    Gravity Angle (deg.) - - 9.0 - - - - -
    MODUS3 Length (inches) 38.75 38.25 37.75 37.25 36.75 36.25 35.75 35.25
    Swing weight R D1
    S D2
    Gross weight (g) R 401 407 412 419 426 433 441 448
    S 405 411 417 423 431 438 446 453
    Made in Japan

    Page Top

    SHAFT

    MODUS3

    Material steel
    Kick-point High
    Butt diameter (mm) 15.24
    Tip diameter (mm) 9.02
    Flex R, S
    # (No.) 3 4 5 6 7 8 9 10
    Gross weight (g) R 111  111  111  111  111  111  111  111 
    S 114  114  114  114  114  114  114  114 
    Torque (deg.) R 2.0  1.9  1.9 1.8 1.8 1.7 1.7 1.7
    S 1.8  1.8  1.7  1.7  1.7  1.6  1.6  1.6 
    Frequency (cpm) R - - - 308 - - - -
    S - - - 315 - - - -

    Page Top

    Page Top